Check the Threading The most common problems stem from incorrect threading of the upper thread or bobbin thread. Unthread your machine completely. Be sure that your thread is sturdy and in good condition. Replace your sewing machine needle as well.

Burrs on the needle, a bent needle or incorrectly placed needle can cause many sewing machine problems. Nick Jr Dora Carnival Adventure 2 more. Re-thread your machine, referring to your manual for a threading diagram or visiting SewUSA (see Resources). Remove the bobbin and replace. Threading errors cause incorrect stitch formation, skipped stitches and thread breaks. Check Your Settings Tension, stitch length and stitch width are all controlled by small dials on the front of the Necchi machine.

Setting just one of these dials incorrectly can cause significant sewing problems. If your stitch length is set to 0, the sewing machine will not feed the fabric. Incorrect tension will cause puckering, looping threads or poor stitch quality. When troubleshooting, use a basic straight stitch to make it easier to correct the settings. Promoted by Clean and Oil Your Necchi Sewing Machine Remove the needle, presser foot and needle plate (which is attached by a few screws). Remove the bobbin case, if there is one.

Use tweezers and a small brush to thoroughly clean this part of the machine. Look the machine over thoroughly to determine where to oil. Many Necchi sewing machine manuals do not give specific oiling directions. You can expect to find one to three oil holes along the top of the machine, depending upon the model. There should also be an oil hole near the bobbin assembly. Place a drop of oil in each hole. In many cases, the oiling and cleaning process will improve the function of your sewing machine.